Setting up all lights and diffusion panel was carefully planned because the product was all shiny and in round shapes. This part refers to the scheme that is below.
In the middle, there is a product (1) which was placed on small, square table on stand. Light (7) was pointed to the black background (3) with yellow gel filter (8).
Light (7) was placed below the product and directed upward. Camera (2) was placed slightly below the horizon level, so the products were presented in hero style. Camera went through the hole in diffusion tracing paper (5), that was placed on a bar (15) above the camera, and hang freely. Diffusion tracing paper in a roll at both sides (4).
Above the whole scene there was also a diffusion tracing paper (6) stretched between bar (15) at the front and background (3). Two stipboxes at both left and right sides (9,10) placed in angle to obtain gradients on shiny surfaces. Light (11) with a grid was placed just behind the camera to get the central gradient on shiny cups. Light (12) highlighted the edges of products. Light (13) is shining through diffusion tracing paper (6), highlighting the top of the composition. Light (14) highlights the top edges and completed shiny elements.